What should be the way to separate mud and water?
Release time:
May 27,2023
The use of polyaluminium chloride, polyacrylamide and other flocculants to treat the sludge can effectively flocculate the sludge in the sludge. Such as polyacrylamide, through the flocculation of polyacrylamide in the sludge between the individual particles of bridging, so that the polymer chain segments adsorbed on different particles, promote the aggregation of particles, to achieve the effect of rapid mud-water separation. Many sewage treatment are used in combination with polyacrylamide and polyaluminum chloride, the treated sewage effect is much more obvious than a single flocculant, but it should be noted that when these two agents are used in combination, polyacrylamide is used as a flocculant, PAC is used as a coagulant.
In order to achieve the purpose of mud and water separation, mud and water separation should use what kind of way? Next mud and water separation equipment manufacturers to give you a brief explanation.
Pharmaceutical treatment
The use of polyaluminium chloride, polyacrylamide and other flocculants to treat the sludge can effectively flocculate the sludge in the sludge. Such as polyacrylamide, through the flocculation of polyacrylamide in the sludge between the individual particles of bridging, so that the polymer chain segments adsorbed on different particles, promote the aggregation of particles, to achieve the effect of rapid mud-water separation. Many sewage treatment are used in combination with polyacrylamide and polyaluminum chloride, the treated sewage effect is much more obvious than a single flocculant, but it should be noted that when these two agents are used in combination, polyacrylamide is used as a flocculant, PAC is used as a coagulant.
Mechanical treatment
Mechanical treatment is very common in the process of mud and water separation, which can be said to be standard for mud and water separation. However, there are many types of machinery that can be used for mud water treatment, and different machines have their own advantages and disadvantages for different mud water.
Now the construction site is a common two-stage cyclone equipment of the mud-water separation system. However, in order to save costs, many equipment has castrated some cyclones, so sediment accumulation in mud sedimentation tanks is often seen. Special mechanical equipment must be used for excavation to ensure the normal operation of the whole system. There are also centrifuges that can directly precipitate soil by centrifugal action, and a mud-water separation system integrating a tailings dry drainage system with a box filter press, ordinary sand irrigation and a belt filter press.
The mechanical treatment scheme has the advantages of clean working environment, energy saving and drug saving, low operating cost, small footprint and low labor intensity.
In summary, in order to achieve the purpose of mud-water separation, polyacrylamide and other flocculants is a very good solution. Of course, it would be better if machinery and medicine could work together.
After the separation of mud and water, it can not only better protect the environment, but also further reduce the sand loss in the sand washing process, killing two birds with one stone.
Tag:
Recommended News
Share
Hebei Headquarters
Hotline: +86-400-999-3630
Tel: +86-316-5758058 +86-316-5758616
Fax: 0316-8933298
Email: sales@kessolidscontrol.com
Address: Industrial Road 2, Chaobai River Industrial Zone, Dachang County, Langfang City, Hebei Province
