OIL & GAS DRILLING MUD SOLIDS CONTROL SYSTEM
The oil & gas drilling mud solids control system is a necessary system in well site used for drilling mud purification and cyclic utilization and the main treatment process is four-stage solids control and five-stage purification. The solids control system effectively separates the big cuttings and barite and other particles from mud step by step, and the purified mud can be reused by drilling rig, which lower the drilling cost and protect the environment.
Learn more>>
WATER-BASE MUD TREATMENT SYSTEM
Water-base mud (WBM) treatment system, also called as solid-liquid separation system, is used for waste mud / slurry treatment, which mainly consists of high-speed VFD centrifuge or filter press and chemical-adding unit. Flocculation is performed to the solid phase in mud / slurry through chemical-adding, then the solid-phase and liquid-phase is separated by high-speed VFD centrifuge or filter press. After dewatering treatment, the separated solids can be used as building material and the separated liquid can be used for industrial consumption and agriculture irrigation.
Learn more>>
OIL-BASED MUD TREATMENT SYSTEM
The OBM treatment system is an auxiliary system of solids control system, mainly consists of vertical cutting dryer, decanter centrifuge, pump, tanks and electric control system. It is mainly applied for all kinds of collection treatment of drilling oil-based mud, which can effectively control the moisture content (6%-15%) and oil content (2%-8%) of solid phase in drilling mud, and the liquid phased will be recycled or further purification treatment.
Learn more>>
CBM/GEOTHERMAL DRILLING MUD SOLIDS CONTROL SYSTEM
KES owns abundant technology accumulation for CBM drilling mud solids control system and Geothermal drilling mud solids control system used in the superficial layer and deep layer CBM & Geothermal drilling application, can provide customized solids control system according to layer situation and customer requirement.
Learn more>>
In the operation of channel cleanout and washed-out sand, the slurry separation system from KES can realize the basic solid-liquid separation well, which greatly improve the operation efficiency.
Learn more>>
DEEP WATER WELL MUD CONTROL SYSTEM
The depth of deep water well drilling is 20m~300m, KES provide special designed water well drilling solids control system based on abundant design and manufacturing experience of drilling solids control system.
Learn more>>
Hebei Headquarters
Hotline: +86-400-999-3630
Tel: +86-316-5758058 +86-316-5758616
Fax: 0316-8933298
Email: sales@kessolidscontrol.com
Address: Industrial Road 2, Chaobai River Industrial Zone, Dachang County, Langfang City, Hebei Province
