KES Energy Equipment-Horizontal spiral centrifuge customize-Degasser company

2024

02-15

KES explains the basic characteristics of mud mixer

Mud mixer is suitable for mixing oil drilling fluid. The cycloid reducer is used for mud mixers below 5.5kW, and the turbine worm type reduction transmission is used for drilling fluid mud mixers above 7.5kW. The pulsator can make the mixing fluid produce vortex motion, thus enhancing the mixing effect.

2024

02-08

What are the buying tips for mud circulation treatment equipment?

The sediment concentration of the treated mud is an important indicator. If the sediment concentration is still high after purification, wouldn't it be a waste of money.

2024

02-01

What is the method to solve the problem of running slurry in the use of vibrating screen?

The formation and mud conditions affect the processing capacity. As the drugs added in the drilling fluid are not fully dissolved and paste on the screen, serious slurry running will occur at this time. It should be used after the drug is fully dissolved, or a screen with larger holes should be used. On the other hand, when drilling into the loose sand-bearing rock layer or sand layer, sand particles are easy to get stuck in the screen holes, resulting in screen blocking phenomenon.

2024

01-25

Do you know the working principle of mud separator?

Mud separator is through the two filter belt wound in a series of sequence, the size of the roller wheel, the use of the filter belt between the extrusion and shear, to remove the water in the slurry of a kind of pressure filter equipment, has the advantages of continuous operation, high degree of automation, energy saving, convenient use and maintenance, is an ideal equipment for sludge dewatering reduction treatment.

2024

01-11

What is the characteristic function of the mud circulation system?

HDD mud circulation system is used for mud purification and recovery of HDD directional crossing construction using mud wall protection and taking away drill cuttings. It is necessary equipment for foundation construction to reduce construction cost and improve construction efficiency.

2023

12-20

What is the function and working principle of the centrifuge?

Centrifuge is the use of centrifugal action, separation of liquid and solid particles or liquid and liquid mixture of the components of the machine, also known as centrifuge.

2023

12-13

Suit jug use pay attention to what matters?

The set water tank of the solid control equipment has the functions of storage, stirring and sedimentation. During the drilling process, the solid control equipment is used to carry out solid-liquid separation of wastes such as drill cuttings and mud, and the separated solid wastes are transported to the off-site, while the separated mud is stored in the suit water tank. The volume of the suit water tank is large and can store more mud. At the same time, a stirring device is arranged inside the suit water tank to stir the mud and prevent the mud from settling. In addition, the jacketed water tank is also provided with an overflow port, which can discharge the upper clear liquid and leave the lower sediment in the tank to achieve solid-liquid separation.

2023

12-06

Scope of application of HDD mud circulation system

HDD mud circulation system is developed, designed and produced to meet the requirements of trenchless technology, and is used to purify and treat mud returned from underground during horizontal directional crossing.

2023

11-29

What are the characteristics and precautions of piling slurry separator

Piling mud-water separator is a kind of mechanical equipment that can separate mud-water mixture. It is mainly applicable to large-diameter pile foundation, positive and negative cycle piling, rotary drill piling, wall protection mud treatment of percussion drilling, mud-water pipe jacking, shield engineering and continuous wall operation in modern foundation engineering construction.

2023

11-22

What are the characteristics of jet mixing device?

The jet slurry mixing device is a device that uses a high-speed jet to mix liquid and solid materials evenly. Jet mixing devices usually refer to jet mixers or jet mixing pumps, which use the kinetic energy of high-speed fluid jets to mix liquid and solid materials (such as mud, chemicals, etc.) evenly to meet various requirements in the drilling process. The jet slurry mixing device is usually used in conjunction with the oil drilling solids control equipment, and is mainly used to configure and weight drilling fluid, change the density, viscosity, and water loss of drilling fluid.

2023

11-14

What are the matters needing attention in the purchase and use of mud circulation treatment equipment?

2023

11-01

What are the precautions for the use of mud circulation equipment?

Mud circulating equipment includes mud circulating pump, mud agitator, etc. Mud circulating pump has the advantages of corrosion resistance, small size and large amount of sewage treatment. The mud mixer has the advantages of compact structure, light weight and convenient maintenance.

2023

10-25

What are the basics of mud separator?

Mud separator is a kind of equipment specially used for solid-liquid separation in oil field drilling process. It can completely separate the solid and liquid in the mud, ensure the recycling of drilling fluid and reduce the risk of formation pollution.

2023

10-18

What are the advantages of using the drum screen for solid air equipment?

Solid empty equipment drum screen is a kind of commonly used solid material screening equipment, also known as rotary screen, drum vibrating screen and so on. Drum sieve is the use of cylindrical screening structure, through the way of rotating sieve cylinder, the material according to different sizes of classification and separation. It is widely used in the screening and classification of various solid materials, such as coal, sand, metal and non-metal, etc.

2023

09-13

Mud water separation equipment manufacturers explain the characteristics of the dryer

KES series drier is a single-stage continuous horizontal scraper discharge centrifuge, which can effectively recover the oil components in the drill cuttings, can effectively achieve solidification transportation, and meet the requirements of environmental protection standards. The processing capacity of the drill cuttings drier produced by our company is 40-50 tons per hour, and the oil content of the processed drill cuttings is usually less than 3%. The equipment can be used for various types of drilling mud, drill cuttings drying for oil-based and composite-based muds is effective.

SERVICE