What are the purchasing skills of mud circulation treatment equipment?

Release time:

Mar 27,2023

An indicator of the current limit is 5 percent, that is, the sediment concentration in the treated mud should not exceed 5 percent, otherwise it will adversely affect the mud pump and mud performance.

The sediment concentration of the treated mud is an important indicator. If the sediment concentration is still high after purification, wouldn't it be a waste of money.
An indicator of the current limit is 5 percent, that is, the sediment concentration in the treated mud should not exceed 5 percent, otherwise it will adversely affect the mud pump and mud performance.
How to judge: it is very cheap to buy a special mud testing instrument. if you buy a set for more than 100 yuan and put it on the construction site, party a will praise your specialty! If the sediment concentration exceeds 5%, you can ask the supplier for an explanation. (If you touch the pulp back with your hand and feel the feeling of prying your hand, you don't need to measure it basically, it must be over)
2. Look: The slurry discharge pump in the equipment is an important core component. The price and service life of cast iron material and alloy material are very different.
So you have to ask: what is the material of the pump in the equipment? If the salesperson tells you it is alloy. You ask again: pump casing and impeller are alloy? To prevent the concept of stealing, resulting in no problem with the impeller, the pump casing first leak.
What are the purchasing skills of mud circulation treatment equipment?

IMG_256

3. Ratio: Compared with the installed power of the equipment, ask several more companies. Of course, under the condition of the same processing capacity, the smaller the power, the better. If the power is small, the power will save electricity, the power will save diesel, and the diesel will save money.
4. Try: Try the handling capacity of the equipment. If the sales staff tells you that the equipment is 50 cubic meters, it should be able to handle 50m of dirty mud per hour.
You throw a 50m ³ rod pump into the mud pit, and the equipment that does not run and does not overflow the mud shows that there is no false mark, which is reliable. Although the amount of treatment will change slightly with the different mud conditions, 80% of it should be met.

Tag:

Previous Page

Use and Maintenance of Centrifuge

Explain the basic characteristics and working principle of mud mixer

Next Page

Previous Page:

Use and Maintenance of Centrifuge

Next page:

Explain the basic characteristics and working principle of mud mixer